Self-assembly
With the included manual, you can easily assemble your Ledgrip yourself.
Step-by-step plan
Follow the steps in order and have a spirit level, drill, and screwdriver ready.
-
Unpack and inspect the package
Check if all parts are present: custom-made profile, mounting brackets, screws and plugs, and — for the LED version — the LED strip and power supply. Lay everything out on a clean surface.
-
Mark the attachment points on the wall
Use the provided template or measure the drill holes yourself. Take into account an appropriate height (80–90 cm from the nosing of the stairs) and ensure that the holes are level and aligned.
-
Drill the holes and insert the plugs
Drill at the marked points using a masonry drill bit (Ø 8 mm for standard wall plugs). Insert the plugs into the wall until they are flush.
-
Tighten the mounting brackets
Position the brackets and firmly tighten the supplied screws. Use a spirit level to check if everything is straight before proceeding.
-
Click the Ledgrip profile onto the brackets
Slide the aluminum profile over the brackets — you'll hear a distinct click when it's correctly secured. Done.
For the LED version: follow the lighting connection instructions in our separate manual.