We can supply your Ledgrip stair railing up to 6 meters in one continuous length. In practice, most staircases are between 4 and 5 meters long. Do you need a wall rail longer than 6 meters? That is possible, contact us at support@ledgrip.com.

Of course. You can also order the Ledgrip wall grab bar without built-in light. In that case, you will receive a modified profile without the recess for an LED strip, so that your Ledgrip wall grab bar will still look neat and sleek.

You can choose between a horizontal Ledgrip handrail that shines light onto the stairs and a vertical Ledgrip handrail that shines light onto the wall.

The Ledgrip wall grab bar is available as standard in black (RAL 9005) and in bronze (C32). Would you like a different colour? This is possible at an additional cost. In the Ledgrip configurator, select the 'other colour' option. Please note that a Ledgrip wall grab bar in a different colour will have a longer delivery time.

Each wall grab bar features a high-quality powder coating with a matt textured finish. This gives the aluminium grab bar a sleek, decorative finish and optimal protection. The result: a scratch-resistant wall grab bar that is durable and resistant to intensive and prolonged use.

Our Ledgrip stair railing is made entirely of aluminium and comes in the colour of your choice. Each wall mount is fitted with a high-quality powder coating with a matt textured finish. This gives the aluminium grip a sleek, decorative finish and optimal protection. The result: a scratch-resistant wall grip that is durable and resistant to intensive and long-term use.

Yes, you can. As there are a few requirements (such as length, dimensions, and connection type), it's best to contact us via info@ledgrip.com. We can then discuss the possibilities for your Ledgrip handrail.

Yes, that is possible. After configuring your Ledgrip handrail, you can optionally order a dimmer before checking out. This is not standard with the Ledgrip.

No. The LED strip in the Ledgrip wall grip operates on 24V DC and must therefore be connected via a 220V to 24V DC converter. Working with a (rechargeable) battery is therefore not possible. The converter can be ordered as an option and is available as a built-in or surface-mounted model.

Thanks to LED technology, our Ledgrip wall grip is extremely energy-efficient.

You can have the power cable exit the wall either at the top or at the bottom of your stairs. Measure approximately 85 cm up from the middle of the top or bottom step. Please note that the cable for connecting the Ledgrip will exit the wall near the start/end point.

Use a flexible speaker wire (24/DC) and run it directly from the wall to your electrical cabinet.

Yes, as standard you can choose between warm ambient light 2700K or functional light 3000K. Do you want a different light temperature? Please do not hesitate to contact us via the contact form.

The LED strip in the Ledgrip operates on 24V DC. To connect it to the mains (220V), you therefore need a converter to go from 220V to 24V DC.

In terms of power, you can expect 10W per running meter. In most situations, a 60W converter is sufficient. If in doubt, it's best to ask your electrician for advice for your specific installation.

Yes, you can. As this depends on your installation and type of sensor, it's best to ask your electrician for advice.

It is best to finish the walls only after the Ledgrip handrail has been installed.

We supply every Ledgrip handrail with the correct chemical anchoring or mounting brackets and a complete manual. For installation, you will need some tools that you may already have or can easily find. You can find that list under the question "What tools do I need to install my Ledgrip handrail?"

The Ledgrip wall grip can be easily mounted on a stone, wooden, or plasterboard (Gyproc) wall; only the type of wall mounting differs in each case. Please indicate the type of wall/surface you will be mounting on when configuring your order. We will then ensure that you receive the correct mounting hardware.

Please note that for mounting on Gyproc, the wall must be or have been reinforced with OSB for a secure installation.

Yes, the Ledgrip stair railing is designed for self-installation, so you don't need to be a construction expert. Of course, you can always ask a handy person from your neighborhood, family, or circle of friends to help. That makes it a bit easier, especially with a Ledgrip stair railing that's several meters long. Or you can have someone like your electrician do it, along with the wiring for the power supply.

Ledgrip wall grips cannot be installed as continuous corners. However, you can combine multiple Ledgrip wall grips to work around corners.

No, your Ledgrip handrail is fully ready for installation.

You can install the Ledgrip handrail yourself using simple tools. You will need: spirit level, drill driver (Torx bit size 15), drill (masonry drill bit 10mm), spanner (size 8), tape measure, painter's tape, pencil, chalk line, and caulk gun.

Yes, after installing the Ledgrip with the invisible fastening, you will need to refinish the wall. The cable for connecting the LED strip must be recessed into the wall.

A Ledgrip handrail with LED lighting, just like a lamp, requires a connection. This can be done with either a speaker cable or a regular power cable. We supply the necessary solder sleeves for this connection. In the video below, we show you step-by-step how to connect the LED lighting to your handrail. Watch the installation video

You receive a standard two-year warranty on the Ledgrip handrail and its electrical components.

We aim to deliver your order within 7 working days.

Within the Benelux, we deliver the Ledgrip handrail in full length (up to 6 metres). You will receive your handrail in a sturdy cardboard tube, ensuring everything arrives well-protected.