Manual

Connecting LED lighting

You can easily connect the LED lighting of your Ledgrip handrail yourself, even without experience in electrical work. Follow these five steps.

Connecting LED lighting

Step-by-step plan

The built-in LED strip and power supply are prepared for a quick plug-and-play installation.

  1. Choose a connection point at the top or bottom

    It's best to connect the power supply near an outlet, at the top or bottom of the stairs. Determine in advance which side the power cable will come out of the wall – top or bottom, left or right.

  2. Hide the cable in the wall

    The power cable comes out of the mounting bracket. Cut a narrow slot in the wall up to the power socket and push the cable into the slot. Plaster and paint over it so that everything remains neatly out of sight.

  3. Connect the LED strip to the power supply

    Plug the LED strip connector into the corresponding socket on the power supply (transformer). Pay attention to the + and − markings — connecting it the wrong way won't damage the strip, but it won't light up.

  4. Plug the power supply into the wall socket

    The Ledgrip lights up immediately. Not working? Check the strip's connection and make sure the outlet has power.

    Need help? An electrician can take care of both the assembly and the connection for you.

  5. Dimming for the right ambiance

    The built-in lighting is dimmable. Did you optionally add a dimmer to your order? Connect it between the socket and the power supply for full control over the brightness.